Showing posts with label metal. Show all posts
Showing posts with label metal. Show all posts

Friday, February 15, 2013

Infinity scarf

The weather has been pretty chilly lately, and I hate being cold around my neck, so I made a bunch of casual, cotton infinity scarves. Luckily my neighbor cleaned out his closet and I got some nice color variety. Scarves are a great way to add a little something extra to a plain outfit. And these simple loops go great with T-shirts and jeans.

Today's project is:

T-shirt Infinity Scarf

You will need:
a t-shirt, extra large is best
(You can find t-shirts at thrift shops, raid your neighbor's closet or buy them cheaply in a 3 pack at Walmart)
scissors

You will cut the bottom hem off the t-shirt. Then cut about 12"  - 14" up (approx.) This should be under the sleeves.

Then holding this round loop, put your foot down on the end, and pull and stretch the top upward. Be strong!
As you do this, the fabric will curl inward, so you don't need to hem this. The T-shirt fabric will not fray.

Now you have a naturally folded loop, double it up around your neck, and voila, instant fun accessory as well as keeping you cozy.

Use the rest of the shirt for rags. Cotton t-shirt fabric is nice and soft and absorbant.

tip of the day:
Buy some Altoid mints and save those great metal tins. They are good for so many things. Small sewing notions, travel jewelry case, store cards fit in them (how do we accumulate so many of those things?). If you need a small 'wallet', use one of these tins. Your credit card, coins and cash fit in nicely plus a couple of keys (without a big keychain). Stash in your pocket and off you go!

That's all for now...
:D

Friday, September 16, 2011

Minty fresh idea

Wow, where did the summer go?
I was looking back when I started blogging and talking about the hot weather, and picnics and summer fun. And now it's the beginning of autumn. Although it's still warm up here in the foothills.
Not that I mind fall that much, it gets a bit cooler, and the leaves start turning pretty colors.
What I don't like is what follows autumn...winter! ugh.
I hate cold weather. And count the days til it gets warmer again.
So what do I do on cold days, stay in and make stuff!

Mint Tin Containers

you need:
~small metal containers (such as Altoid mint tins, I also got a few tins from cigars that my husband ordered)
~ duct tape (get decorative designs: like zebra stripes or tie dye designs, from Walmart or Michaels)
~optional: squeezy paint

The duct tape sticks really well to the tins. Make sure they are clean, shake out the mint crumbs from inside, too. I rounded the edges of the tape so it fit with the shape of the tin. After the tape is on, burnish it down with your fingernail or popsicle stick so you get a good flat finish. Although it won't look smooth, it looks kind of leathery, and that's a good look.
You can cover only the top, but I like to do the bottom and inside lid.
Then I added some embellishments with the squeezy paint, like dots around the edges, or fake laces or stitches. This paint takes a while to dry, so keep that in mind (you might only want to do the top)

If you have small tins, you can make a keychain with it. Take a hammer and nail and make 2 holes in one end. You'll have to open the top and work on a firm surface (like scrap wood). You don't want to bend the metal. Loop a piece of string or twine (with a bead or two, if you want) through the holes, and tie inside the tin, double knot and trim ends.
Then get a big key ring, and fasten it to the string.

You'll find lots of uses for these little gems:
1. I use one for traveling, to put my recycled aluminum can earrings in so they don't get crunched.
2. If you made a keychain, you can keep your vitamins or pills you take daily in there. That way you'll have it with you at all times.
3. It's the perfect size to fit credit cards, your driver's license and change. It fits into the back pocket of jeans nicely too, when you don't want to lug a purse or wallet around.
4. Kids love little boxes to put little treasures in.
5. Use it for gift giving for Christmas or birthdays. Put a gift card in it, a ribbon around it- instant gift. No need for further wrapping.
6. Or make an emergency sewing kit. Fill it with a few safety pins, a needles with a long piece of thread on it (stuck into a piece of cardboard and folded over the sharp tip), a few buttons of different sizes and small emery board.

Make a bunch, they're fun and useful, and recycled!

tip of the day:
While visiting Montana last month, I spilled tea on my white pants. My friend Kathy suggested getting out the stain using Dawn detergent.  Now this is the 'original' Dawn (she said that works best).
Take a small amount in your palm, add a little water and suds it up, and then rub onto the fabric. I did this several times, and using my fingernail to scritch it in a bit, the tea blotches started coming out. Wash as usual, but do not dry it, until you check to see if the stain is gone. If not, repeat process.  (Heat will set the stain in and make it virtually impossible to get out). And tea and coffee are really tough to remove.
I was overjoyed! Or should I say "over-dawned"? sorry 'bout that, I couldn't help it.

That's all for now...
:D

Friday, August 12, 2011

That Caps it!

I love making new things from old stuff

Right now, Tom and I are in Helena, Montana. We attended a great wedding and the following week was an awesome family reunion.
Of course there was lots of food, and fun, and beverages being consumed. And where's there's bottles, there's bottle caps! And when I see a bunch of cool designs, I get ideas.

Today's project is:
Bottle Cap Magnets

you need:
~ bottle caps
~ pliers
~ strong glue (E6000, or Amazing Goop or Gorilla Glue)
~ magnets (round ones preferably)
~ hammer
~ cardboard (2 small pieces)

As you see in the above picture, you start with prying the edges open a bit with your pliers. (that's the second row of caps) Work your way around the cap a little bit at a time. You don't have to stretch it out fully, just enough so when you hit it, it will flatten outward.

Then you take your hammer, the cardboard and the bottle cap. Sandwich the cap, "good side" up,  between the two cardboard pieces and on a hard surface (sidewalk or driveway) and hit it gently all around to flatten it out. Then turn the cap over, and repeat hitting it, so that it flattens out evenly. (see picture above, last row)
The cardboard protects the cap, otherwise the hammer will give it a worn out, scratched up look.

Then squeeze a blob of glue on the magnet and press onto the 'wrong' side of the bottle cap. Wait overnight to let it cure fully. The next day, you'll have a nice assortment of magnets. Great gift for friends with favorite drinks.  Bring a six pack along with the magnets, and you'll be the Best Guest!

tip of the day:
Since we're talking about magnets... do you ever get advertisements that have a magnet on the back? Sometimes different events advertise this way, realtors give you a magnetic mini- calendars, companies have their business cards on a magnetic backing.
Well, don't throw it away, you can recycle the magnet.
Take one of your own photographs, place the magnetic card on it, trace around it, cut it out and glue onto the 'non-magnetic' side. And voila ~ you now have a cool personalized magnet instead of a pesty advertisement.

That's it for now

Dee